Fiberglass

Published February 5th, 2025 by Jordan Emery

Publishing on my own terms

JM Micro-LOK HP

Published February 5th, 2025 by Jordan Emery

  Figure 1: JM Micro-Lok HP   Uses: Hot, cold, concealed, or exposed piping. Operating Temperatures: 0°F - 850°F System Examples: Domestic water systems, heating hot water systems, chilled water systems, waste, drains, etc. *May not be suitable for environments where fibrous materials could cause issues in production. i.e. Cleanroom spaces. Approxim

JM Micro-Lok HP

Published February 6th, 2025 by Jordan Emery

  What type of system is being insulated? Chilled Water/Dual Cycle   Above Ambient Conditions      All work activities shall be conducted in accordance with all applicable federal, state and local codes and laws. This shall include, but not be limited to, the Occupational Safety and Health Act. All insulation shall be installed by a licensed applica

Uglier Than Socks on a Rooster

Published February 6th, 2025 by Jordan Emery

First introduced to the Boyter team in January of 2017.  Term commonly used to describe inappropriate materials installed on insulated systems

Setting up an estimate in MIKE20

Published February 5th, 2025 by Jordan Emery

  Need to create new estimate? Open MIKE20       go to estimates tab       click create new estimate       Enter all this data: 1,2,3,4 etc select these settings: A ,B, or C        

JM Fiberglass Pipe Insulation

Published February 6th, 2025 by Jordan Emery

Armaflex

Published February 5th, 2025 by Jordan Emery

Lets gooo suppy